cDSP Compressor

The compressor reduces the dynamic range of an audio signal.

Sets the compression ratio — between 1.1:1 and 50.0:1.

Note: compression ratios work so that a ratio of 2.0:1 means a signal 8 dB over the threshold is reduced to 4 dB over the threshold.

Sets the compression threshold in full-scale dB - between -70 and 0 dBFS.

Sets the compression attack time in milliseconds - between 0.01 and 1000 ms.

Attack - the time it takes for the signal to become fully compressed after exceeding the threshold level.

Sets the compression release time in milliseconds - between 1 and 10000 ms.

Release - the time it takes for the signal to go back to the original state.

Sets the compression soft knee on/off state.

Sets the compressor detection type - Analog or Digital.

The Analog detection option tends to be softer than the Digital one.

Sets the compressor makeup gain - between -40 and 40 dB.