# cDSP LEQ Meter

The LEQ Meter provides loudness information for different Leq weightings and Analysis Times.

The meter operates continuously until Reset or Pause is pressed.

## Parameters

### Type

The Type concerns the frequency weighting used to calculate the Leq.

#### Options:

- Leq(K) (ITU-R BS.1770-4)

- Leq(RLB) (Revised Low Frequency B Curve)

- Leq(M) (ITUR468-4)

- Leq(A)

- Leq(C)

- Leq(Z) (Flat Weighting)

### Analysis Window

The Analysis Window sets the time for each analysis block.

#### Options:

From 50 to 10000 milliseconds.

### Overlap

The Overlap sets the overlap between analysis blocks.

#### Options:

From 0 (no overlap) to 99 percent.

### Reset

Reset meter and clear history.

Copyright © 2011 - 2018 LoudLAB. All rights reserved.