cDSP Compressor
The compressor reduces the dynamic range of an audio signal.
Ratio
Sets the compression ratio in dB - between 1.1:1 and 50.0:1.
Note: compression ratios work so that a ratio of 2.0:1 indicates that a signal exceeding the threshold by 8 dB will be attenuated down to 4 dB above the threshold.
Also see GUI.Threshold
Sets the compression threshold in full-scale dB - between -70 and 0 dBFS.
Also see GUI.Attack
Sets the compression attack time in milliseconds - between 0.01 and 1000 ms.
Attack - the time it takes for the signal to become fully compressed after exceeding the threshold level.
Also see GUI.Release
Sets the compression release time in milliseconds - between 1 and 10000 ms.
Release - the time it takes for the signal to go back to the original state.
Also see GUI.Soft Knee
Sets the compression soft knee on/off state.
Analog Detector
Sets the compressor detection type - Analog or Digital.
The Analog detection option tends to be softer than the Digital one.
Gain
Sets the compressor makeup gain - between -40 and 40 dB.
Also see GUI.Copyright © 2011 - 2024 LoudLAB. All rights reserved.