Hi, I'm using behringer x touch as a Machie Controller with Sounddesk. In a first usage it is ok and works fine. But I have some remark concerning 2-3 points: - at start of sounddesk, all motorized fader are moved in weird positions, always the same but nothing related to the fader settings in sounddesk. As soon as we start moving fader in sounddesk, the position or fader moved in synch. - when setting the fader in sounddesk at 0,0dB, on the controller the position is a little bit below 0db (not fully correct then), there is around 2dB delta -> FYI in other application like Logic Pro, fader are correctly aligned and synch (so no problem on controller level) - when clicking in some zone of sounddesk area (not linked to fader or other controller), for instance in the "signal meter" area, then fader moved again in weird position
(Your app is really what i need: a light app which start very fast, in order to have a mixer. Don't want to start always Logic pro just to mix audio... FYI: I found it and bought it through Apple App store.)
Comments
- at start of sounddesk, all motorized fader are moved in weird positions, always the same but nothing related to the fader settings in sounddesk. As soon as we start moving fader in sounddesk, the position or fader moved in synch.
- when setting the fader in sounddesk at 0,0dB, on the controller the position is a little bit below 0db (not fully correct then), there is around 2dB delta -> FYI in other application like Logic Pro, fader are correctly aligned and synch (so no problem on controller level)
- when clicking in some zone of sounddesk area (not linked to fader or other controller), for instance in the "signal meter" area, then fader moved again in weird position
(Your app is really what i need: a light app which start very fast, in order to have a mixer. Don't want to start always Logic pro just to mix audio...
FYI: I found it and bought it through Apple App store.)
I can reproduce the fader alignment issue, it will be fixed on the next minor update.
Have a Great Day!
This bug has been fixed.
I confirm ! Thank you very much !