SoundDesk

SoundDesk App

Digital Audio Mixer

AU Host

MIDI

TouchOSC

Mac OS X 10.11 Ready



Bring the power of a mixing console to your Mac!



SoundDesk 3 is the easiest way to turn your Mac into a professional mixing desk!


SoundDesk by LoudLAB, can be used by audio professionals to mix on the fly, by musicians to record a rehearsal, and anything else that involves mixing or routing digital audio.






AUDIO UNITS


SoundDesk has up to 12 Audio Units inserts on every channel and up to 4 on the master section, so you can use your favourite plugins.


Furthermore, each channel displays the delay introduced by the plugins, and lets the user correct the unwanted time shift.



ROUTING

All channels can receive any real input and send to any real output, master section or auxiliary. Making the routing possibilities of SoundDesk only limited by your hardware.

Channels can be either mono, stereo or auxiliary receivers, and you can switch between options at any time.



MIXING

Up to 48x2 input paths (48 stereo channels), 54x2 output paths and 12 Aux sends per channel (pre- or post-fader).

Each channel is equipped with a DC blocker, a noise or wave generator and a delay unit.

The user can assign names and colours to individual channels.

Goniometers and PPM meters on all channels.



MASTER TOOLS

SoundDesk 3 includes a stereo 3 or 2-Way Linear Phase Crossover, a "Analogue Warmth" option (tube like overdrive and tape like saturation) and a spectrograph at the master channel.

The master channel can be recorded in real-time and saved as: AIFF, WAV, CAF, SDII, NeXT/Sun, FLAC, M4A (ALAC/Apple Lossless), M4A (AAC) and MP4 (AAC).



MIDI CONTROL


SoundDesk can communicate with the Mackie Control Protocol, HUI MIDI Mapping Protocol and standard CC devices.


The CC mode includes a simple MIDI mapping system designed to ease communications between your devices and SoundDesk.




Wireless control of SoundDesk from iPad, iPhone or iPod Touch...

SoundDesk can be controlled by a device with TouchOSC installed and connected to the same Wi-Fi network.

TouchOSC (hexler.net) can be downloaded from the Apple App Store (iPad, iPhone or iPod Touch). This simple app is a customisable OSC controller, which means you can customise the layouts (included) and upload them into your device with the TouchOSC Editor.

OSC stands for Open Sound Control and it is a modern protocol for communication among sound devices.





Takes advantage to the latest OS X technologies:

• Retina

• Full Screen

• 64 Bit

• Notification Center





System Requirements

• Mac Intel running OS X 10.9.5 or later

• 64-bit processor

• At least 2GB of memory

• 100MB of available disk space




Buy Now






Copyright © 2017 LoudLAB. All rights reserved. Terms & Conditions | Privacy Policy